configs/toradex_apalis_imx6: remove defconfig, broken

This defconfig no longer builds:

  https://gitlab.com/buildroot.org/buildroot/-/jobs/11026774072

It has been broken for at least 2 months:

  https://gitlab.com/buildroot.org/buildroot/-/jobs?name=T%3Dtoradex_apalis_imx6&kind=BUILD

It uses an outdated Linux 4.9 kernel, which no longer builds with
modern toolchains.

Unless a fix is provided, this defconfig will be removed.

Fixes:

  https://gitlab.com/buildroot.org/buildroot/-/jobs/11026774072

Cc: Sergio Prado <sergio.prado@e-labworks.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle <arnout@rnout.be>

.checkpackageignore

@@ -66,7 +66,6 @@ board/stmicroelectronics/stm32f469-disco/flash_sd.sh Shellcheck
 board/stmicroelectronics/stm32f469-disco/flash_xip.sh Shellcheck
 board/synopsys/axs10x/post-build.sh Shellcheck
 board/technologic/ts4900/post-image.sh Shellcheck
-board/toradex/apalis-imx6/post-image.sh Shellcheck
 board/udoo/common/post-build.sh Shellcheck
 boot/afboot-stm32/0003-Makefile-disable-stack-protector.patch lib_patch.Upstream
 boot/optee-os/3.13.0/0001-core-zlib-fix-build-warning-when-_LFS64_LARGEFILE-is.patch lib_patch.Upstream
@@ -197,7 +196,6 @@ configs/solidrun_clearfog_gt_8k_defconfig lib_defconfig.ForceCheckHash
 configs/solidrun_macchiatobin_defconfig lib_defconfig.ForceCheckHash
 configs/stm32mp157c_odyssey_defconfig lib_defconfig.ForceCheckHash
 configs/terasic_de10nano_cyclone5_defconfig lib_defconfig.ForceCheckHash
-configs/toradex_apalis_imx6_defconfig lib_defconfig.ForceCheckHash
 configs/ts4900_defconfig lib_defconfig.ForceCheckHash
 configs/ts5500_defconfig lib_defconfig.ForceCheckHash
 configs/ts7680_defconfig lib_defconfig.ForceCheckHash

DEVELOPERS

@@ -3036,8 +3036,6 @@ F:	package/wpa_supplicant/
 F:	package/xr819-xradio/
 
 N:	Sergio Prado <sergio.prado@e-labworks.com>
-F:	board/toradex/apalis-imx6/
-F:	configs/toradex_apalis_imx6_defconfig
 F:	package/aoetools/
 F:	package/asn1c/
 F:	package/azure-iot-sdk-c/

board/toradex/apalis-imx6/genimage.cfg

@@ -1,15 +0,0 @@
-# Minimal SD card image for the Toradex Apalis i.MX6 COM
-#
-# It does not need a boot section for a bootloader since it is booted
-# from its internal flash memory (eMMC).
-
-image sdcard.img {
-	hdimage {
-	}
-
-	partition rootfs {
-		partition-type = 0x83
-		image = "rootfs.ext2"
-		size = 512M
-	}
-}

board/toradex/apalis-imx6/patches/linux-headers/linux-headers.hash

@@ -1 +0,0 @@
-../linux/linux.hash

board/toradex/apalis-imx6/patches/linux/linux.hash

@@ -1,2 +0,0 @@
-# Locally calculated
-sha256  722ece80ee8dbcc04309c89139da8b1df6974e1ab4bb66d04c1906a576fa46fa  linux-d899927728beca8357a5b4120b690cb3c1d80844-git4.tar.gz

board/toradex/apalis-imx6/patches/uboot/uboot.hash

@@ -1,2 +0,0 @@
-# Locally calculated
-sha256  f8d3e45d7944c9620ecacbd8f8824db42134c70e3b55efd6dab127bf763e48c2  uboot-30a1208727729dae22cb42f9ba9ba17efe5e6f77-git4.tar.gz

board/toradex/apalis-imx6/post-image.sh

@@ -1,20 +0,0 @@
-#!/usr/bin/env bash
-
-GENIMAGE_CFG="$(dirname $0)/genimage.cfg"
-GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
-
-# copy the uEnv.txt to the output/images directory
-cp board/toradex/apalis-imx6/uEnv.txt $BINARIES_DIR/uEnv.txt
-
-rm -rf "${GENIMAGE_TMP}"
-
-# generate rootfs.img
-genimage \
-  --rootpath "${TARGET_DIR}" \
-  --tmppath "${GENIMAGE_TMP}" \
-  --inputpath "${BINARIES_DIR}" \
-  --outputpath "${BINARIES_DIR}" \
-  --config "${GENIMAGE_CFG}"
-
-RET=${?}
-exit ${RET}

board/toradex/apalis-imx6/readme.txt

@@ -1,53 +0,0 @@
-Toradex Apalis i.MX6 Computer on Module
-
-Intro
-=====
-
-The Apalis iMX6 is a small form-factor Computer on Module that comes
-in both quad core and dual core versions based on Freescale i.MX6Q and
-Freescale i.MX6D SoCs respectively. The Cortex A9 quad core and dual
-core CPU peaks at 1 GHz for commercial temperature variant, while the
-industrial temperature variant has a peak frequency of 800 MHz.
-
-https://www.toradex.com/computer-on-modules/apalis-arm-family/freescale-imx-6
-
-It supports two carrier boards:
-
-Apalis Evaluation Board
-https://www.toradex.com/products/carrier-boards/apalis-evaluation-board
-
-Ixora Carrier Board
-https://www.toradex.com/products/carrier-boards/ixora-carrier-board
-
-How to build it
-===============
-
-Configure Buildroot:
-
-    $ make toradex_apalis_imx6_defconfig
-
-Compile everything and build the rootfs image:
-
-    $ make
-
-How to boot the image
-=====================
-
-The board only boots from its internal flash memory eMMC, so the
-bootloader image should be copied to it, following the procedures
-described in Toradex website.
-
-http://developer.toradex.com/knowledge-base/flashing-linux-on-imx6-modules
-
-Buildroot prepares a "sdcard.img" in output/images/ with the kernel
-image, device tree and a root filesystem, ready to be dumped on an SD
-card.
-
-    $ dd if=output/images/sdcard.img of=/dev/sdX bs=1M
-
-To boot from the SD card, you should change the U-Boot
-environment. Since U-Boot is running from internal eMMC, you will need
-to access its command line prompt and manually set the necessary
-variables to boot from the external SD card. For convenience, you can
-use uEnv.txt provided in output/images/ as a reference to create the
-necessary U-Boot variables to boot from the SD card.

board/toradex/apalis-imx6/uEnv.txt

@@ -1,6 +0,0 @@
-boot_file=zImage
-fdt_file=imx6q-apalis_v1_0-ixora.dtb
-sdargs=ip=off root=/dev/mmcblk1p1 rw,noatime rootfstype=ext4 rootwait
-sddtbload=ext2load mmc 2:1 ${fdt_addr_r} boot/${fdt_file}
-sdkernelload=ext2load mmc 2:1 ${kernel_addr_r} boot/${boot_file}
-bootcmd=run setup; setenv bootargs ${defargs} ${sdargs} ${setupargs} ${vidargs}; echo Booting from SD card...; run sddtbload; run sdkernelload; bootz ${kernel_addr_r} - ${fdt_addr_r}

configs/toradex_apalis_imx6_defconfig

@@ -1,26 +0,0 @@
-BR2_arm=y
-BR2_cortex_a9=y
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
-BR2_GLOBAL_PATCH_DIR="board/toradex/apalis-imx6/patches"
-BR2_TARGET_GENERIC_GETTY_PORT="ttymxc0"
-BR2_ROOTFS_POST_IMAGE_SCRIPT="board/toradex/apalis-imx6/post-image.sh"
-BR2_LINUX_KERNEL=y
-BR2_LINUX_KERNEL_CUSTOM_GIT=y
-BR2_LINUX_KERNEL_CUSTOM_REPO_URL="git://git.toradex.com/linux-toradex.git"
-BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="d899927728beca8357a5b4120b690cb3c1d80844"
-BR2_LINUX_KERNEL_DEFCONFIG="apalis_imx6"
-BR2_LINUX_KERNEL_DTS_SUPPORT=y
-BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx6q-apalis-eval imx6q-apalis-ixora imx6q-apalis-ixora-v1.1"
-BR2_LINUX_KERNEL_INSTALL_TARGET=y
-BR2_TARGET_ROOTFS_EXT2=y
-BR2_TARGET_ROOTFS_EXT2_4=y
-BR2_TARGET_UBOOT=y
-BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
-BR2_TARGET_UBOOT_CUSTOM_GIT=y
-BR2_TARGET_UBOOT_CUSTOM_REPO_URL="git://git.toradex.com/u-boot-toradex.git"
-BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="30a1208727729dae22cb42f9ba9ba17efe5e6f77"
-BR2_TARGET_UBOOT_BOARD_DEFCONFIG="apalis_imx6"
-BR2_TARGET_UBOOT_FORMAT_IMG=y
-BR2_TARGET_UBOOT_SPL=y
-BR2_TARGET_UBOOT_SPL_NAME="SPL"
-BR2_PACKAGE_HOST_GENIMAGE=y