Lots and lots of changes

make/autoconf.mk

@@ -20,8 +20,8 @@ $(AUTOCONF_DIR)/.unpacked: $(DL_DIR)/$(AUTOCONF_SOURCE)
 	touch $(AUTOCONF_DIR)/.unpacked
 
 $(AUTOCONF_DIR)/.configured: $(AUTOCONF_DIR)/.unpacked
-	(cd $(AUTOCONF_DIR); rm -rf config.cache; PATH=$(STAGING_DIR)/bin:$$PATH \
-		CC=$(TARGET_CC) EMACS="no" \
+	(cd $(AUTOCONF_DIR); rm -rf config.cache; \
+		PATH=$(TARGET_PATH) CC=$(TARGET_CC) EMACS="no" \
 		./configure \
 		--target=$(GNU_TARGET_NAME) \
 		--prefix=/usr \
@@ -41,7 +41,6 @@ $(AUTOCONF_DIR)/bin/$(AUTOCONF_BINARY): $(AUTOCONF_DIR)/.configured
 	$(MAKE) CC=$(TARGET_CC) -C $(AUTOCONF_DIR)
 
 $(TARGET_DIR)/$(AUTOCONF_TARGET_BINARY): $(AUTOCONF_DIR)/bin/$(AUTOCONF_BINARY)
-	PATH=$(STAGING_DIR)/bin:$$PATH CC=$(TARGET_CC) \
 	$(MAKE) \
 	    prefix=$(TARGET_DIR)/usr \
 	    exec_prefix=$(TARGET_DIR)/usr \

make/automake.mk

@@ -21,7 +21,7 @@ $(AUTOMAKE_DIR)/.unpacked: $(DL_DIR)/$(AUTOMAKE_SOURCE)
 
 $(AUTOMAKE_DIR)/.configured: $(AUTOMAKE_DIR)/.unpacked
 	(cd $(AUTOMAKE_DIR); rm -rf config.cache; \
-		PATH=$(STAGING_DIR)/bin:$$PATH CC=$(TARGET_CC) \
+		PATH=$(TARGET_PATH) CC=$(TARGET_CC) \
 		./configure \
 		--target=$(GNU_TARGET_NAME) \
 		--prefix=/usr \
@@ -38,11 +38,10 @@ $(AUTOMAKE_DIR)/.configured: $(AUTOMAKE_DIR)/.unpacked
 	touch  $(AUTOMAKE_DIR)/.configured
 
 $(AUTOMAKE_DIR)/$(AUTOMAKE_BINARY): $(AUTOMAKE_DIR)/.configured
-	$(MAKE) CC=$(TARGET_CC) -C $(AUTOMAKE_DIR)
+	$(MAKE) -C $(AUTOMAKE_DIR)
 	touch -c $(AUTOMAKE_DIR)/$(AUTOMAKE_BINARY)
 
 $(TARGET_DIR)/$(AUTOMAKE_TARGET_BINARY): $(AUTOMAKE_DIR)/$(AUTOMAKE_BINARY)
-	PATH=$(STAGING_DIR)/bin:$$PATH CC=$(TARGET_CC) \
 	$(MAKE) \
 	    prefix=$(TARGET_DIR)/usr \
 	    exec_prefix=$(TARGET_DIR)/usr \
@@ -63,7 +62,7 @@ $(TARGET_DIR)/$(AUTOMAKE_TARGET_BINARY): $(AUTOMAKE_DIR)/$(AUTOMAKE_BINARY)
 automake: uclibc $(TARGET_DIR)/$(AUTOMAKE_TARGET_BINARY)
 
 automake-clean:
-	$(MAKE) DESTDIR=$(TARGET_DIR) CC=$(TARGET_CC) -C $(AUTOMAKE_DIR) uninstall
+	$(MAKE) DESTDIR=$(TARGET_DIR) -C $(AUTOMAKE_DIR) uninstall
 	-$(MAKE) -C $(AUTOMAKE_DIR) clean
 
 automake-dirclean:

make/bash.mk

@@ -21,8 +21,7 @@ $(BASH_DIR)/.unpacked: $(DL_DIR)/$(BASH_SOURCE)
 
 $(BASH_DIR)/.configured: $(BASH_DIR)/.unpacked
 	(cd $(BASH_DIR); rm -rf config.cache; \
-		PATH=$(STAGING_DIR)/bin:$$PATH \
-		CC=$(TARGET_CC) CC_FOR_BUILD=$(HOSTCC) \
+		PATH=$(TARGET_PATH) CC=$(TARGET_CC) CC_FOR_BUILD=$(HOSTCC) \
 		./configure \
 		--target=$(GNU_TARGET_NAME) \
 		--host=$(GNU_TARGET_NAME) \

make/berkeleydb.mk

@@ -19,7 +19,7 @@ $(DB_DIR)/.dist: $(DL_DIR)/$(DB_SOURCE)
 
 $(DB_DIR)/.configured: $(DB_DIR)/.dist
 	(cd $(DB_DIR)/build_unix; rm -rf config.cache; \
-		PATH=$(STAGING_DIR)/bin:$$PATH CC=$(TARGET_CC) \
+		PATH=$(TARGET_PATH) CC=$(TARGET_CC) \
 		../dist/configure \
 		--target=$(GNU_TARGET_NAME) \
 		--prefix=/usr \

make/coreutils.mk

@@ -23,7 +23,7 @@ $(COREUTILS_DIR)/.unpacked: $(DL_DIR)/$(COREUTILS_SOURCE)
 
 $(COREUTILS_DIR)/.configured: $(COREUTILS_DIR)/.unpacked
 	(cd $(COREUTILS_DIR); rm -rf config.cache; \
-		PATH=$(STAGING_DIR)/bin:$$PATH CC=$(TARGET_CC) \
+		PATH=$(TARGET_PATH) CC=$(TARGET_CC) \
 		./configure \
 		--target=$(GNU_TARGET_NAME) \
 		--prefix=/usr \

make/dhcp_relay.mk

@@ -23,10 +23,7 @@ $(DHCP_RELAY_DIR)/.unpacked: $(DL_DIR)/$(DHCP_RELAY_SOURCE)
 	touch $(DHCP_RELAY_DIR)/.unpacked
 
 $(DHCP_RELAY_DIR)/.configured: $(DHCP_RELAY_DIR)/.unpacked
-	(cd $(DHCP_RELAY_DIR); PATH=$(STAGING_DIR)/bin:$$PATH \
-		CC=$(TARGET_CC) \
-		./configure \
-	);
+	(cd $(DHCP_RELAY_DIR); PATH=$(TARGET_PATH) CC=$(TARGET_CC) ./configure );
 	touch  $(DHCP_RELAY_DIR)/.configured
 
 $(DHCP_RELAY_DIR)/$(DHCP_RELAY_BINARY): $(DHCP_RELAY_DIR)/.configured

make/ext2root.mk

@@ -37,7 +37,7 @@ GENEXT2_REALSIZE=$(subst total,, $(shell du $(TARGET_DIR) -s -c -k | grep total
 GENEXT2_SIZE=$(shell expr $(GENEXT2_REALSIZE) + $(GENEXT2_ADDTOROOTSIZE))
 # We currently add about 400 device nodes, so add that into the total
 GENEXT2_INODES=$(shell expr $(shell find $(TARGET_DIR) | wc -l) + 400)
-#GENEXT2_SIZE=100000
+GENEXT2_SIZE=100000
 
 ext2root: genext2fs
 	-@find $(TARGET_DIR)/lib -type f -name \*.so\* | xargs $(STRIP) --strip-unneeded 2>/dev/null || true;

make/findutils.mk

@@ -24,7 +24,7 @@ $(FINDUTILS_DIR)/.unpacked: $(DL_DIR)/$(FINDUTILS_SOURCE)
 
 $(FINDUTILS_DIR)/.configured: $(FINDUTILS_DIR)/.unpacked
 	(cd $(FINDUTILS_DIR); rm -rf config.cache; \
-		PATH=$(STAGING_DIR)/bin:$$PATH CC=$(TARGET_CC) \
+		PATH=$(TARGET_PATH) CC=$(TARGET_CC) \
 		./configure \
 		--target=$(GNU_TARGET_NAME) \
 		--prefix=/usr \

make/gawk.mk

@@ -21,7 +21,7 @@ $(GAWK_DIR)/.unpacked: $(DL_DIR)/$(GAWK_SOURCE)
 
 $(GAWK_DIR)/.configured: $(GAWK_DIR)/.unpacked
 	(cd $(GAWK_DIR); rm -rf config.cache; \
-		PATH=$(STAGING_DIR)/bin:$$PATH CC=$(TARGET_CC) \
+		PATH=$(TARGET_PATH) CC=$(TARGET_CC) \
 		./configure \
 		--target=$(GNU_TARGET_NAME) \
 		--prefix=/usr \
@@ -42,7 +42,10 @@ $(GAWK_DIR)/$(GAWK_BINARY): $(GAWK_DIR)/.configured
 	$(MAKE) CC=$(TARGET_CC) -C $(GAWK_DIR)
 
 $(TARGET_DIR)/$(GAWK_TARGET_BINARY): $(GAWK_DIR)/$(GAWK_BINARY)
+	rm -f $(TARGET_DIR)/usr/bin/awk
 	$(MAKE) DESTDIR=$(TARGET_DIR) CC=$(TARGET_CC) -C $(GAWK_DIR) install
+	rm -f $(TARGET_DIR)/usr/bin/gawk-*
+	(cd $(TARGET_DIR)/usr/bin; ln -sf gawk awk) 
 	rm -rf $(TARGET_DIR)/share/locale $(TARGET_DIR)/usr/info \
 		$(TARGET_DIR)/usr/man $(TARGET_DIR)/usr/share/doc
 

make/gcc_target.mk

@@ -48,10 +48,8 @@ $(BINUTILS_DIR2)/.configured:
 	mkdir -p $(BINUTILS_DIR2)
 	mkdir -p $(TARGET_DIR)/usr/include
 	mkdir -p $(TARGET_DIR)/usr/$(GNU_TARGET_NAME)/
-	#(cd $(TARGET_DIR)/usr/$(GNU_TARGET_NAME); ln -fs ../lib)
-	#(cd $(TARGET_DIR)/usr/$(GNU_TARGET_NAME); ln -fs ../include)
 	(cd $(TARGET_DIR)/usr/$(GNU_TARGET_NAME); ln -fs ../include sys-include)
-	(cd $(BINUTILS_DIR2); PATH=$(STAGING_DIR)/bin:$$PATH AR=$(TARGET_CROSS)ar \
+	(cd $(BINUTILS_DIR2); PATH=$(TARGET_PATH) AR=$(TARGET_CROSS)ar \
 		RANLIB=$(TARGET_CROSS)ranlib LD=$(TARGET_CROSS)ld NM=$(TARGET_CROSS)nm \
 		CC=$(TARGET_CROSS)gcc \
 		$(BINUTILS_DIR)/configure \
@@ -70,23 +68,24 @@ $(BINUTILS_DIR2)/.configured:
 		--infodir=/usr/info \
 		--includedir=$(STAGING_DIR)/include \
 		--with-gxx-include-dir=$(STAGING_DIR)/include/c++ \
-		--disable-shared $(MULTILIB) \
+		--enable-shared $(MULTILIB) \
 		--program-prefix="" \
 	);
 	touch $(BINUTILS_DIR2)/.configured
 
 $(BINUTILS_DIR2)/binutils/objdump: $(BINUTILS_DIR2)/.configured
-	PATH=$(STAGING_DIR)/bin:$$PATH $(MAKE) AR=$(TARGET_CROSS)ar \
+	$(MAKE) AR=$(TARGET_CROSS)ar \
 		RANLIB=$(TARGET_CROSS)ranlib LD=$(TARGET_CROSS)ld \
 		CC=$(TARGET_CROSS)gcc GCC_FOR_TARGET=$(TARGET_CROSS)gcc \
-		CC_FOR_TARGET=$(TARGET_CROSS)gcc -C $(BINUTILS_DIR2)
+		CC_FOR_TARGET=$(TARGET_CROSS)gcc tooldir=/usr -C $(BINUTILS_DIR2)
 
 $(TARGET_DIR)/usr/bin/ld: $(BINUTILS_DIR2)/binutils/objdump 
-	PATH=$(STAGING_DIR)/bin:$$PATH CC=$(HOSTCC) GCC_FOR_TARGET=$(TARGET_CROSS)gcc \
+	CC=$(HOSTCC) GCC_FOR_TARGET=$(TARGET_CROSS)gcc \
 	    AR_FOR_TARGET=$(TARGET_CROSS)ar RANLIB_FOR_TARGET=$(TARGET_CROSS)ranlib \
 	    LD_FOR_TARGET=$(TARGET_CROSS)ld NM_FOR_TARGET=$(TARGET_CROSS)nm \
 	    CC_FOR_TARGET=$(TARGET_CROSS)gcc \
 	    $(MAKE) \
+	    tooldor=/usr \
 	    prefix=$(TARGET_DIR)/usr \
 	    exec_prefix=$(TARGET_DIR)/usr \
 	    bindir=$(TARGET_DIR)/usr/bin \
@@ -109,7 +108,16 @@ $(TARGET_DIR)/usr/bin/ld: $(BINUTILS_DIR2)/binutils/objdump
 	-$(STRIP) $(TARGET_DIR)/usr/bin/* 
 
 $(TARGET_DIR)/usr/lib/libg.a:
-	$(STAGING_DIR)/$(GNU_TARGET_NAME)/bin/ar rv $(TARGET_DIR)/usr/lib/libg.a;
+	$(TARGET_CROSS)ar rv $(TARGET_DIR)/usr/lib/libg.a;
+	cp $(BINUTILS_DIR)/include/ansidecl.h $(TARGET_DIR)/usr/include/
+	cp $(BINUTILS_DIR)/include/bfdlink.h $(TARGET_DIR)/usr/include/
+	cp $(BINUTILS_DIR)/include/dis-asm.h $(TARGET_DIR)/usr/include/
+	cp $(BINUTILS_DIR)/include/libiberty.h $(TARGET_DIR)/usr/include/
+	cp $(BINUTILS_DIR)/include/symcat.h $(TARGET_DIR)/usr/include/
+	cp $(BINUTILS_DIR2)/bfd/bfd.h $(TARGET_DIR)/usr/include/
+	cp -a $(BINUTILS_DIR2)/bfd/.libs/* $(TARGET_DIR)/usr/lib/
+	cp -a $(BINUTILS_DIR2)/opcodes/.libs/* $(TARGET_DIR)/usr/lib/
+	cp -a $(BINUTILS_DIR2)/libiberty/libiberty.a $(TARGET_DIR)/usr/lib/
 
 binutils_target: gcc_final $(TARGET_DIR)/usr/bin/ld $(TARGET_DIR)/usr/lib/libg.a
 
@@ -133,6 +141,8 @@ $(TARGET_DIR)/usr/lib/libc.a: $(STAGING_DIR)/lib/libc.a
 	$(MAKE) DEVEL_PREFIX=$(TARGET_DIR)/usr SYSTEM_DEVEL_PREFIX=$(TARGET_DIR) \
 		DEVEL_TOOL_PREFIX=$(TARGET_DIR) -C $(UCLIBC_DIR) \
 		install_dev
+	#remove the extra copy of the shared libs
+	rm -f $(TARGET_DIR)/usr/lib/*-*.so
 	(cd $(TARGET_DIR)/usr/lib; \
 		ln -fs /lib/libc.so.0 libc.so; \
 		ln -fs /lib/libdl.so.0 libdl.so; \
@@ -141,6 +151,7 @@ $(TARGET_DIR)/usr/lib/libc.a: $(STAGING_DIR)/lib/libc.a
 		ln -fs /lib/libutil.so.0 libutil.so; \
 		ln -fs /lib/libm.so.0 libm.so; \
 		ln -fs /lib/libpthread.so.0 libpthread.so; \
+		ln -fs /lib/libnsl.so.0 libnsl.so; \
 	)
 
 uclibc_target: gcc_final $(TARGET_DIR)/usr/lib/libc.a
@@ -183,7 +194,7 @@ $(GCC_BUILD_DIR3)/.configured: $(GCC_BUILD_DIR3)/.gcc_build_hacks
 	mkdir -p $(TARGET_DIR)/usr/$(GNU_TARGET_NAME)
 	(cd $(TARGET_DIR)/usr/$(GNU_TARGET_NAME); ln -fs ../include)
 	(cd $(TARGET_DIR)/usr/$(GNU_TARGET_NAME); ln -fs ../include sys-include)
-	(cd $(GCC_BUILD_DIR3); PATH=$(STAGING_DIR)/bin:$$PATH \
+	(cd $(GCC_BUILD_DIR3); PATH=$(TARGET_PATH) \
 		AS=$(TARGET_CROSS)as \
 		LD=$(TARGET_CROSS)ld \
 		AR=$(TARGET_CROSS)ar \
@@ -218,7 +229,6 @@ $(GCC_BUILD_DIR3)/.configured: $(GCC_BUILD_DIR3)/.gcc_build_hacks
 	touch $(GCC_BUILD_DIR3)/.configured
 
 $(GCC_BUILD_DIR3)/.compiled: $(GCC_BUILD_DIR3)/.configured
-	PATH=$(STAGING_DIR)/bin:$$PATH \
 	    AS=$(TARGET_CROSS)as \
 	    LD=$(TARGET_CROSS)ld \
 	    AR=$(TARGET_CROSS)ar \
@@ -231,7 +241,6 @@ $(GCC_BUILD_DIR3)/.compiled: $(GCC_BUILD_DIR3)/.configured
 	touch $(GCC_BUILD_DIR3)/.compiled
 
 $(TARGET_DIR)/usr/bin/gcc: $(GCC_BUILD_DIR3)/.compiled
-	PATH=$(STAGING_DIR)/bin:$$PATH \
 	    $(MAKE) \
 	    CC=$(TARGET_CROSS)gcc \
 	    AS=$(TARGET_CROSS)as \
@@ -263,14 +272,20 @@ $(TARGET_DIR)/usr/bin/gcc: $(GCC_BUILD_DIR3)/.compiled
 	(cd $(TARGET_DIR)/usr/bin; ln -fs gcc cc)
 	rm -rf $(TARGET_DIR)/usr/$(GNU_TARGET_NAME)/include
 	rm -rf $(TARGET_DIR)/usr/$(GNU_TARGET_NAME)/sys-include
+	rm -rf $(TARGET_DIR)/usr/include/include $(TARGET_DIR)/usr/usr
 	-mv $(TARGET_DIR)/usr/bin/$(GNU_TARGET_NAME)-cpp $(TARGET_DIR)/usr/bin/cpp
 	-mv $(TARGET_DIR)/usr/bin/$(GNU_TARGET_NAME)-gcc $(TARGET_DIR)/usr/bin/gcc
 	-mv $(TARGET_DIR)/usr/bin/$(GNU_TARGET_NAME)-c++ $(TARGET_DIR)/usr/bin/c++
 	-mv $(TARGET_DIR)/usr/bin/$(GNU_TARGET_NAME)-g++ $(TARGET_DIR)/usr/bin/g++
 	-mv $(TARGET_DIR)/usr/bin/$(GNU_TARGET_NAME)-c++filt $(TARGET_DIR)/usr/bin/c++filt
 	-cp -dpf $(STAGING_DIR)/lib/libgcc* $(TARGET_DIR)/lib/
+	chmod a-x $(STAGING_DIR)/lib/*++*
 	cp -a $(STAGING_DIR)/lib/*++* $(TARGET_DIR)/lib/
 	cp -a $(STAGING_DIR)/include/c++ $(TARGET_DIR)/usr/include/
+	-mv $(TARGET_DIR)/lib/*.a $(TARGET_DIR)/usr/lib/
+	-mv $(TARGET_DIR)/lib/*.la $(TARGET_DIR)/usr/lib/
+	rm -f $(TARGET_DIR)/lib/libstdc++.so
+	(cd $(TARGET_DIR)/usr/lib; ln -fs /lib/libstdc++.a libstdc++.so)
 	-$(STRIP) $(TARGET_DIR)/bin/* 
 	-$(STRIP) $(TARGET_DIR)/usr/bin/* 
 	rm -rf $(TARGET_DIR)/share/locale $(TARGET_DIR)/usr/info \

make/gdb.mk

@@ -17,10 +17,10 @@ $(GDB_DIR)/.unpacked: $(DL_DIR)/$(GDB_SOURCE)
 
 $(GDB_DIR)/.configured: $(GDB_DIR)/.unpacked
 	(cd $(GDB_DIR); rm -rf config.cache; \
-		PATH=$(STAGING_DIR)/bin:$$PATH AR=$(TARGET_CROSS)ar \
+		AR=$(TARGET_CROSS)ar \
 		AS=$(TARGET_CROSS)as LD=$(TARGET_CROSS)ld \
 		RANLIB=$(TARGET_CROSS)ranlib NM=$(TARGET_CROSS)nm \
-		CC=$(TARGET_CC) \
+		PATH=$(TARGET_PATH) CC=$(TARGET_CC) \
 		./configure \
 		--target=$(GNU_TARGET_NAME) \
 		--host=$(GNU_TARGET_NAME) \

make/gdbserver.mk

@@ -12,10 +12,10 @@ GDB_WDIR:=$(BUILD_DIR)/gdbserver
 $(GDB_WDIR)/.configured: $(GDB_DIR)/.unpacked
 	mkdir -p $(GDB_WDIR)
 	(cd $(GDB_WDIR); rm -rf config.cache; \
-		PATH=$(STAGING_DIR)/bin:$$PATH AR=$(TARGET_CROSS)ar \
+		AR=$(TARGET_CROSS)ar \
 		AS=$(TARGET_CROSS)as LD=$(TARGET_CROSS)ld \
 		RANLIB=$(TARGET_CROSS)ranlib NM=$(TARGET_CROSS)nm \
-		CC=$(TARGET_CC) \
+		PATH=$(TARGET_PATH) CC=$(TARGET_CC) \
 		$(GDB_DIR)/gdb/gdbserver/configure \
 		--target=$(GNU_TARGET_NAME) \
 		--prefix=/usr \

make/jpeg.mk

@@ -37,7 +37,7 @@ $(JPEG_DIR)/.unpacked: $(DL_DIR)/$(JPEG_SOURCE)
 $(JPEG_DIR)/.configured: $(JPEG_DIR)/.unpacked
 	zcat $(DL_DIR)/$(JPEG_SOURCE) | tar -C $(BUILD_DIR) -xvf -
 	(cd $(JPEG_DIR); rm -rf config.cache; \
-		PATH=$(STAGING_DIR)/bin:$$PATH CC=$(TARGET_CC) \
+		PATH=$(TARGET_PATH) CC=$(TARGET_CC) \
 		./configure \
 		--target=$(GNU_TARGET_NAME) \
 		--prefix=/usr \

make/libglib12.mk

@@ -20,7 +20,7 @@ $(LIBGLIB12_DIR)/.unpacked: $(DL_DIR)/$(LIBGLIB12_SOURCE)
 
 $(LIBGLIB12_DIR)/.configured: $(LIBGLIB12_DIR)/.unpacked
 	(cd $(LIBGLIB12_DIR); rm -rf config.cache; \
-		PATH=$(STAGING_DIR)/bin:$$PATH CC=$(TARGET_CC) \
+		PATH=$(TARGET_PATH) CC=$(TARGET_CC) \
 		./configure \
 		--target=$(GNU_TARGET_NAME) \
 		--prefix=/usr \

make/libtool.mk

@@ -21,7 +21,7 @@ $(LIBTOOL_DIR)/.unpacked: $(DL_DIR)/$(LIBTOOL_SOURCE)
 
 $(LIBTOOL_DIR)/.configured: $(LIBTOOL_DIR)/.unpacked
 	(cd $(LIBTOOL_DIR); rm -rf config.cache; \
-		PATH=$(STAGING_DIR)/bin:$$PATH CC=$(TARGET_CC) \
+		PATH=$(TARGET_PATH) CC=$(TARGET_CC) \
 		./configure \
 		--target=$(GNU_TARGET_NAME) \
 		--prefix=/usr \
@@ -43,7 +43,6 @@ $(LIBTOOL_DIR)/$(LIBTOOL_BINARY): $(LIBTOOL_DIR)/.configured
 	touch -c $(LIBTOOL_DIR)/$(LIBTOOL_BINARY)
 
 $(TARGET_DIR)/$(LIBTOOL_TARGET_BINARY): $(LIBTOOL_DIR)/$(LIBTOOL_BINARY)
-	PATH=$(STAGING_DIR)/bin:$$PATH CC=$(TARGET_CC) \
 	$(MAKE) \
 	    prefix=$(TARGET_DIR)/usr \
 	    exec_prefix=$(TARGET_DIR)/usr \

make/links.mk

@@ -18,7 +18,7 @@ $(LINKS_DIR)/.unpacked: $(DL_DIR)/$(LINKS_SOURCE)
 
 $(LINKS_DIR)/.configured: $(LINKS_DIR)/.unpacked
 	(cd $(LINKS_DIR); rm -rf config.cache; \
-		PATH=$(STAGING_DIR)/bin:$$PATH CC=$(TARGET_CC) \
+		PATH=$(TARGET_PATH) CC=$(TARGET_CC) \
 		./configure \
 		--target=$(GNU_TARGET_NAME) \
 		--prefix=/usr \

make/lrzsz.mk

@@ -36,7 +36,7 @@ $(LRZSZ_DIR)/.unpacked: $(DL_DIR)/$(LRZSZ_SOURCE)
 
 $(LRZSZ_DIR)/.configured: $(LRZSZ_DIR)/.unpacked
 	(cd $(LRZSZ_DIR); rm -rf config.cache; \
-		PATH=$(STAGING_DIR)/bin:$$PATH CC=$(TARGET_CC) \
+		PATH=$(TARGET_PATH) CC=$(TARGET_CC) \
 		./configure \
 		--target=$(GNU_TARGET_NAME) \
 		--prefix=/usr \

make/m4.mk

@@ -21,7 +21,7 @@ $(M4_DIR)/.unpacked: $(DL_DIR)/$(M4_SOURCE)
 
 $(M4_DIR)/.configured: $(M4_DIR)/.unpacked
 	(cd $(M4_DIR); rm -rf config.cache; \
-		PATH=$(STAGING_DIR)/bin:$$PATH CC=$(TARGET_CC) \
+		PATH=$(TARGET_PATH) CC=$(TARGET_CC) \
 		./configure \
 		--target=$(GNU_TARGET_NAME) \
 		--prefix=/usr \
@@ -33,7 +33,6 @@ $(M4_DIR)/src/$(M4_BINARY): $(M4_DIR)/.configured
 	$(MAKE) CC=$(TARGET_CC) -C $(M4_DIR)
 
 $(TARGET_DIR)/$(M4_TARGET_BINARY): $(M4_DIR)/src/$(M4_BINARY)
-	PATH=$(STAGING_DIR)/bin:$$PATH CC=$(TARGET_CC) \
 	$(MAKE) \
 	    prefix=$(TARGET_DIR)/usr \
 	    exec_prefix=$(TARGET_DIR)/usr \

make/make.mk

@@ -21,7 +21,7 @@ $(GNUMAKE_DIR)/.unpacked: $(DL_DIR)/$(GNUMAKE_SOURCE)
 
 $(GNUMAKE_DIR)/.configured: $(GNUMAKE_DIR)/.unpacked
 	(cd $(GNUMAKE_DIR); rm -rf config.cache; \
-		PATH=$(STAGING_DIR)/bin:$$PATH CC=$(TARGET_CC) \
+		PATH=$(TARGET_PATH) CC=$(TARGET_CC) \
 		./configure \
 		--target=$(GNU_TARGET_NAME) \
 		--prefix=/usr \
@@ -39,17 +39,17 @@ $(GNUMAKE_DIR)/.configured: $(GNUMAKE_DIR)/.unpacked
 	touch  $(GNUMAKE_DIR)/.configured
 
 $(GNUMAKE_DIR)/$(GNUMAKE_BINARY): $(GNUMAKE_DIR)/.configured
-	$(MAKE) CC=$(TARGET_CC) -C $(GNUMAKE_DIR)
+	$(MAKE) -C $(GNUMAKE_DIR)
 
 $(TARGET_DIR)/$(GNUMAKE_TARGET_BINARY): $(GNUMAKE_DIR)/$(GNUMAKE_BINARY)
-	$(MAKE) DESTDIR=$(TARGET_DIR) CC=$(TARGET_CC) -C $(GNUMAKE_DIR) install
+	$(MAKE) DESTDIR=$(TARGET_DIR) -C $(GNUMAKE_DIR) install
 	rm -rf $(TARGET_DIR)/share/locale $(TARGET_DIR)/usr/info \
 		$(TARGET_DIR)/usr/man $(TARGET_DIR)/usr/share/doc
 
 make: uclibc $(TARGET_DIR)/$(GNUMAKE_TARGET_BINARY)
 
 make-clean:
-	$(MAKE) DESTDIR=$(TARGET_DIR) CC=$(TARGET_CC) -C $(GNUMAKE_DIR) uninstall
+	$(MAKE) DESTDIR=$(TARGET_DIR) -C $(GNUMAKE_DIR) uninstall
 	-$(MAKE) -C $(GNUMAKE_DIR) clean
 
 make-dirclean:

make/mke2fs.mk

@@ -21,7 +21,7 @@ $(MKE2FS_DIR)/.unpacked: $(DL_DIR)/$(MKE2FS_SOURCE)
 
 $(MKE2FS_DIR)/.configured: $(MKE2FS_DIR)/.unpacked
 	(cd $(MKE2FS_DIR); rm -rf config.cache; \
-		PATH=$(STAGING_DIR)/bin:$$PATH CC=$(TARGET_CC) \
+		PATH=$(TARGET_PATH) CC=$(TARGET_CC) \
 		./configure \
 		--target=$(GNU_TARGET_NAME) \
 		--with-cc=$(TARGET_CC) \

make/ncurses.mk

@@ -5,7 +5,7 @@
 #
 #############################################################
 # Copyright (C) 2002 by Ken Restivo <ken@246gt.com>
-# $Id: ncurses.mk,v 1.20 2003/01/23 01:18:58 andersen Exp $
+# $Id: ncurses.mk,v 1.21 2003/02/12 08:10:38 andersen Exp $
 #
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU Library General Public License as
@@ -38,8 +38,9 @@ $(NCURSES_DIR)/.dist: $(DL_DIR)/$(NCURSES_SOURCE)
 	touch  $(NCURSES_DIR)/.dist
 
 $(NCURSES_DIR)/.configured: $(NCURSES_DIR)/.dist
-	(cd $(NCURSES_DIR); rm -rf config.cache; PATH=$(STAGING_DIR)/bin:$$PATH \
-		BUILD_CC=$(HOSTCC) HOSTCC=$(HOSTCC) CC=$(TARGET_CC) \
+	(cd $(NCURSES_DIR); rm -rf config.cache; \
+		PATH=$(TARGET_PATH) BUILD_CC=$(HOSTCC) \
+		HOSTCC=$(HOSTCC) CC=$(TARGET_CC) \
 		./configure \
 		--target=$(GNU_TARGET_NAME) \
 		--prefix=/usr \
@@ -65,7 +66,7 @@ $(NCURSES_DIR)/lib/libncurses.so: $(NCURSES_DIR)/.configured
 		DESTDIR=$(STAGING_DIR) -C $(NCURSES_DIR)
 
 $(STAGING_DIR)/lib/libncurses.a: $(NCURSES_DIR)/lib/libncurses.so
-	PATH=$(STAGING_DIR)/bin:$$PATH BUILD_CC=$(HOSTCC) \
+	BUILD_CC=$(HOSTCC) \
 	    HOSTCC=$(HOSTCC) CC=$(TARGET_CC) $(MAKE) \
 	    prefix=$(STAGING_DIR) \
 	    exec_prefix=$(STAGING_DIR) \
@@ -82,6 +83,7 @@ $(STAGING_DIR)/lib/libncurses.a: $(NCURSES_DIR)/lib/libncurses.so
 	    gxx_include_dir=$(STAGING_DIR)/include/c++ \
 	    ticdir=$(STAGING_DIR)/usr/share/terminfo \
 	    -C $(NCURSES_DIR) install;
+	    chmod a-x $(NCURSES_DIR)/lib/libncurses.so*
 	    touch -c $(STAGING_DIR)/lib/libncurses.a 
 
 $(TARGET_DIR)/lib/libncurses.so: $(STAGING_DIR)/lib/libncurses.a
@@ -98,9 +100,13 @@ $(TARGET_DIR)/usr/lib/libncurses.a: $(TARGET_DIR)/lib/libncurses.so
 	cp -dpf $(NCURSES_DIR)/include/unctrl.h $(TARGET_DIR)/usr/include/
 	cp -dpf $(NCURSES_DIR)/include/termcap.h $(TARGET_DIR)/usr/include/
 	cp -dpf $(NCURSES_DIR)/lib/libncurses.a $(TARGET_DIR)/usr/lib/
+	rm -f $(TARGET_DIR)/usr/lib/terminfo
+	(cd $(TARGET_DIR)/usr/lib; ln -fs /usr/share/terminfo)
 	(cd $(TARGET_DIR)/usr/lib; ln -fs libncurses.a libcurses.a)
 	(cd $(TARGET_DIR)/usr/lib; ln -fs libncurses.a libtermcap.a)
 	(cd $(TARGET_DIR)/usr/include; ln -fs ncurses.h curses.h)
+	rm -f $(TARGET_DIR)/lib/libncurses.so
+	(cd $(TARGET_DIR)/usr/lib; ln -fs /lib/libncurses.so.5.2 libncurses.so)
 	touch -c $(TARGET_DIR)/usr/lib/libncurses.a
 
 ncurses-headers: $(TARGET_DIR)/usr/lib/libncurses.a

make/netkitbase.mk

@@ -24,7 +24,7 @@ $(NETKITBASE_DIR)/.unpacked: $(DL_DIR)/$(NETKITBASE_SOURCE)
 	touch $(NETKITBASE_DIR)/.unpacked
 
 $(NETKITBASE_DIR)/.configured: $(NETKITBASE_DIR)/.unpacked
-	(cd $(NETKITBASE_DIR); PATH=$(STAGING_DIR)/bin:$$PATH CC=$(TARGET_CC) \
+	(cd $(NETKITBASE_DIR); PATH=$(TARGET_PATH) CC=$(TARGET_CC) \
 		./configure --installroot=$(TARGET_DIR) --with-c-compiler=$(TARGET_CC) \
 	)
 	touch  $(NETKITBASE_DIR)/.configured

make/netkittelnet.mk

@@ -27,7 +27,7 @@ $(NETKITTELNET_DIR)/.unpacked: $(DL_DIR)/$(NETKITTELNET_SOURCE)
 	touch $(NETKITTELNET_DIR)/.unpacked
 
 $(NETKITTELNET_DIR)/.configured: $(NETKITTELNET_DIR)/.unpacked
-	(cd $(NETKITTELNET_DIR); PATH=$(STAGING_DIR)/bin:$$PATH CC=$(TARGET_CC) \
+	(cd $(NETKITTELNET_DIR); PATH=$(TARGET_PATH) CC=$(TARGET_CC) \
 		./configure --installroot=$(TARGET_DIR) --with-c-compiler=$(TARGET_CC) \
 	)
 	touch  $(NETKITTELNET_DIR)/.configured

make/newt.mk

@@ -23,7 +23,7 @@ $(NEWT_DIR)/.source: $(DL_DIR)/$(NEWT_SOURCE)
 
 $(NEWT_DIR)/.configured: $(NEWT_DIR)/.source
 	(cd $(NEWT_DIR); rm -rf config.cache; \
-		PATH=$(STAGING_DIR)/bin:$$PATH CC=$(TARGET_CC) \
+		PATH=$(TARGET_PATH) CC=$(TARGET_CC) \
 		./configure \
 		--target=$(GNU_TARGET_NAME) \
 		--prefix=/usr \

make/ntp.mk

@@ -24,7 +24,7 @@ $(NTP_DIR)/.unpacked: $(DL_DIR)/$(NTP_SOURCE)
 
 $(NTP_DIR)/.configured: $(NTP_DIR)/.unpacked
 	(cd $(NTP_DIR); rm -rf config.cache; \
-		PATH=$(STAGING_DIR)/bin:$$PATH CC=$(TARGET_CC) \
+		PATH=$(TARGET_PATH) CC=$(TARGET_CC) \
 		./configure \
 		--target=$(GNU_TARGET_NAME) \
 		--prefix=/usr \

make/openssh.mk

@@ -17,7 +17,7 @@ $(OPENSSH_DIR)/.unpacked: $(DL_DIR)/$(OPENSSH_SOURCE)
 
 $(OPENSSH_DIR)/.configured: $(OPENSSH_DIR)/.unpacked
 	(cd $(OPENSSH_DIR); rm -rf config.cache; \
-		PATH=$(STAGING_DIR)/bin:$$PATH CC=$(TARGET_CC) \
+		PATH=$(TARGET_PATH) CC=$(TARGET_CC) \
 		./configure \
 		--target=$(GNU_TARGET_NAME) \
 		--prefix=/usr \

make/openssl.mk

@@ -32,9 +32,11 @@ $(OPENSSL_DIR)/apps/openssl: $(OPENSSL_DIR)/Makefile
 $(STAGING_DIR)/lib/libcrypto.so.0: $(OPENSSL_DIR)/apps/openssl
 	$(MAKE) CC=$(TARGET_CC) INSTALL_PREFIX=$(STAGING_DIR) -C $(OPENSSL_DIR) install
 	cp -fa $(OPENSSL_DIR)/libcrypto.so* $(STAGING_DIR)/lib/
+	chmod a-x $(STAGING_DIR)/lib/libcrypto.so.0.9.7
 	(cd $(STAGING_DIR)/lib; ln -fs libcrypto.so.0.9.7 libcrypto.so)
 	(cd $(STAGING_DIR)/lib; ln -fs libcrypto.so.0.9.7 libcrypto.so.0)
 	cp -fa $(OPENSSL_DIR)/libssl.so* $(STAGING_DIR)/lib/
+	chmod a-x $(STAGING_DIR)/lib/libssl.so.0.9.7
 	(cd $(STAGING_DIR)/lib; ln -fs libssl.so.0.9.7 libssl.so)
 	(cd $(STAGING_DIR)/lib; ln -fs libssl.so.0.9.7 libssl.so.0)
 
@@ -48,6 +50,12 @@ $(TARGET_DIR)/usr/lib/libssl.a: $(TARGET_DIR)/lib/libcrypto.so.0
 	cp -a $(STAGING_DIR)/include/openssl $(TARGET_DIR)/usr/include/
 	cp -dpf $(STAGING_DIR)/lib/libssl.a $(TARGET_DIR)/usr/lib/
 	cp -dpf $(STAGING_DIR)/lib/libcrypto.a $(TARGET_DIR)/usr/lib/
+	rm -f $(TARGET_DIR)/lib/libcrypto.so
+	rm -f $(TARGET_DIR)/lib/libssl.so
+	(cd $(TARGET_DIR)/usr/lib; \
+		ln -fs /lib/libssl.so.0.9.7 libssl.so; \
+		ln -fs /lib/libcrypto.so.0.9.7 libcrypto.so; \
+	)
 	touch -c $(TARGET_DIR)/usr/lib/libssl.a
 
 openssl-headers: $(TARGET_DIR)/usr/lib/libssl.a

make/pciutils.mk

@@ -28,7 +28,7 @@ $(PCIUTILS_DIR)/.unpacked: $(DL_DIR)/$(PCIUTILS_SOURCE) $(DL_DIR)/$(PCIIDS_SOURC
 
 $(PCIUTILS_DIR)/.configured: $(PCIUTILS_DIR)/.unpacked
 	(cd $(PCIUTILS_DIR); rm -rf config.cache; \
-		PATH=$(STAGING_DIR)/bin:$$PATH CC=$(TARGET_CC) \
+		PATH=$(TARGET_PATH) CC=$(TARGET_CC) \
 		./configure \
 		--target=$(GNU_TARGET_NAME) \
 		--prefix=/usr \

make/pppd.mk

@@ -26,7 +26,7 @@ $(PPPD_DIR)/.unpacked: $(DL_DIR)/$(PPPD_SOURCE)
 
 $(PPPD_DIR)/.configured: $(PPPD_DIR)/.unpacked
 	(cd $(PPPD_DIR); rm -rf config.cache; \
-		PATH=$(STAGING_DIR)/bin:$$PATH CC=$(TARGET_CC) \
+		PATH=$(TARGET_PATH) CC=$(TARGET_CC) \
 		./configure \
 		--target=$(GNU_TARGET_NAME) \
 		--prefix=/usr \

make/rxvt.mk

@@ -38,7 +38,7 @@ $(RXVT_DIR)/.unpacked: $(DL_DIR)/$(RXVT_SOURCE)
 
 $(RXVT_DIR)/.configured: $(RXVT_DIR)/.unpacked
 	(cd $(RXVT_DIR); rm -rf config.cache; \
-		PATH=$(STAGING_DIR)/bin:$$PATH CC=$(TARGET_CC) \
+		PATH=$(TARGET_PATH) CC=$(TARGET_CC) \
 		./configure \
 		--target=$(GNU_TARGET_NAME) \
 		--prefix=/usr/X11R6 \

make/sed.mk

@@ -21,7 +21,7 @@ $(SED_DIR)/.unpacked: $(DL_DIR)/$(SED_SOURCE)
 
 $(SED_DIR)/.configured: $(SED_DIR)/.unpacked
 	(cd $(SED_DIR); rm -rf config.cache; \
-		PATH=$(STAGING_DIR)/bin:$$PATH CC=$(TARGET_CC) \
+		PATH=$(TARGET_PATH) CC=$(TARGET_CC) \
 		./configure \
 		--target=$(GNU_TARGET_NAME) \
 		--prefix=/usr \

make/socat.mk

@@ -27,7 +27,7 @@ $(SOCAT_WORKDIR)/Makefile: $(SOCAT_DIR)/.unpacked
 	rm -f $(SOCAT_WORKDIR)/Makefile
 	mkdir -p $(SOCAT_WORKDIR)
 	(cd $(SOCAT_WORKDIR); rm -rf config.cache; \
-		PATH=$(STAGING_DIR)/bin:$$PATH CC=$(TARGET_CC) \
+		PATH=$(TARGET_PATH) CC=$(TARGET_CC) \
 		$(SOCAT_DIR)/configure \
 		--target=$(GNU_TARGET_NAME) \
 		--prefix=/usr \

make/strace.mk

@@ -20,7 +20,7 @@ $(STRACE_DIR)/.unpacked: $(DL_DIR)/$(STRACE_SOURCE)
 
 $(STRACE_DIR)/.configured: $(STRACE_DIR)/.unpacked
 	(cd $(STRACE_DIR); rm -rf config.cache; \
-		PATH=$(STAGING_DIR)/bin:$$PATH CC=$(TARGET_CC) \
+		PATH=$(TARGET_PATH) CC=$(TARGET_CC) \
 		./configure \
 		--target=$(GNU_TARGET_NAME) \
 		--host=$(GNU_TARGET_NAME) \

make/tn5250.mk

@@ -11,7 +11,7 @@ $(TN5250_DIR)/.dist: $(DL_DIR)/$(TN5250_SOURCE)
 
 $(TN5250_DIR)/.configured: $(TN5250_DIR)/.dist
 	(cd $(TN5250_DIR); rm -rf config.cache; \
-		PATH=$(STAGING_DIR)/bin:$$PATH CC=$(TARGET_CC) \
+		PATH=$(TARGET_PATH) CC=$(TARGET_CC) \
 		./configure \
 		--target=$(GNU_TARGET_NAME) \
 		--prefix=/usr \

make/uclibc_toolchain.mk

@@ -25,6 +25,9 @@ ifeq ($(GCC_2_95_TOOLCHAIN),false)
 # hacking on the toolchain...
 #
 #############################################################
+#Directory in which to build the toolchain
+TOOL_BUILD_DIR=$(BASE_DIR)/toolchain_build
+
 TARGET_LANGUAGES:=c,c++
 
 # If you want multilib enabled, enable this...
@@ -40,12 +43,12 @@ MULTILIB:=--enable-multilib
 #############################################################
 BINUTILS_SITE:=ftp://ftp.gnu.org/gnu/binutils/
 BINUTILS_SOURCE:=binutils-2.13.2.1.tar.bz2
-BINUTILS_DIR:=$(BUILD_DIR)/binutils-2.13.2.1
+BINUTILS_DIR:=$(TOOL_BUILD_DIR)/binutils-2.13.2.1
 #
 # Perhaps you would perfer to use the older 2.12.1 version?
 #BINUTILS_SITE:=ftp://ftp.gnu.org/gnu/binutils/
 #BINUTILS_SOURCE:=binutils-2.12.1.tar.bz2
-#BINUTILS_DIR:=$(BUILD_DIR)/binutils-2.12.1
+#BINUTILS_DIR:=$(TOOL_BUILD_DIR)/binutils-2.12.1
 
 ifeq ($(USE_UCLIBC_SNAPSHOT),true)
 # Be aware that this changes daily....
@@ -60,7 +63,7 @@ endif
 
 GCC_SITE:=ftp://ftp.gnu.org/gnu/gcc/
 GCC_SOURCE:=gcc-3.2.2.tar.gz
-GCC_DIR:=$(BUILD_DIR)/gcc-3.2.2
+GCC_DIR:=$(TOOL_BUILD_DIR)/gcc-3.2.2
 
 
 
@@ -69,19 +72,20 @@ GCC_DIR:=$(BUILD_DIR)/gcc-3.2.2
 # Setup some initial paths
 #
 #############################################################
-$(BUILD_DIR)/.setup:
-	mkdir -p $(BUILD_DIR)
+$(TOOL_BUILD_DIR)/.setup:
+	mkdir -p $(TOOL_BUILD_DIR)
 	mkdir -p $(DL_DIR)
 	mkdir -p $(STAGING_DIR)
 	mkdir -p $(STAGING_DIR)/include
 	mkdir -p $(STAGING_DIR)/lib/gcc-lib
+	mkdir -p $(STAGING_DIR)/usr/lib
+	mkdir -p $(STAGING_DIR)/usr/bin;
 	mkdir -p $(STAGING_DIR)/$(GNU_TARGET_NAME)/
 	(cd $(STAGING_DIR)/$(GNU_TARGET_NAME); ln -fs ../lib)
 	(cd $(STAGING_DIR)/$(GNU_TARGET_NAME); ln -fs ../include)
 	(cd $(STAGING_DIR)/$(GNU_TARGET_NAME); ln -fs ../include sys-include)
-	mkdir -p $(STAGING_DIR)/usr/lib
 	(cd $(STAGING_DIR)/usr/lib; ln -fs ../../lib/gcc-lib)
-	touch $(BUILD_DIR)/.setup
+	touch $(TOOL_BUILD_DIR)/.setup
 
 
 #############################################################
@@ -102,12 +106,12 @@ uclibc_toolchain-dirclean: gcc_final-dirclean uclibc-dirclean gcc_initial-dircle
 # build binutils
 #
 #############################################################
-BINUTILS_DIR1:=$(BUILD_DIR)/binutils-build
+BINUTILS_DIR1:=$(TOOL_BUILD_DIR)/binutils-build
 $(DL_DIR)/$(BINUTILS_SOURCE):
 	$(WGET) -P $(DL_DIR) $(BINUTILS_SITE)/$(BINUTILS_SOURCE)
 
-$(BINUTILS_DIR)/.unpacked: $(BUILD_DIR)/.setup $(DL_DIR)/$(BINUTILS_SOURCE)
-	bzcat $(DL_DIR)/$(BINUTILS_SOURCE) | tar -C $(BUILD_DIR) -xvf -
+$(BINUTILS_DIR)/.unpacked: $(TOOL_BUILD_DIR)/.setup $(DL_DIR)/$(BINUTILS_SOURCE)
+	bzcat $(DL_DIR)/$(BINUTILS_SOURCE) | tar -C $(TOOL_BUILD_DIR) -xvf -
 	touch $(BINUTILS_DIR)/.unpacked
 
 $(BINUTILS_DIR)/.patched: $(BINUTILS_DIR)/.unpacked
@@ -128,7 +132,8 @@ $(BINUTILS_DIR)/.patched: $(BINUTILS_DIR)/.unpacked
 
 $(BINUTILS_DIR1)/.configured: $(BINUTILS_DIR)/.patched
 	mkdir -p $(BINUTILS_DIR1)
-	(cd $(BINUTILS_DIR1); CC=$(HOSTCC) $(BINUTILS_DIR)/configure \
+	(cd $(BINUTILS_DIR1); CC=$(HOSTCC) \
+		$(BINUTILS_DIR)/configure \
 		--target=$(GNU_TARGET_NAME) \
 		--prefix=$(STAGING_DIR) \
 		--exec-prefix=$(STAGING_DIR) \
@@ -153,6 +158,20 @@ $(STAGING_DIR)/$(GNU_TARGET_NAME)/bin/ld: $(BINUTILS_DIR1)/binutils/objdump
 	$(MAKE) -C $(BINUTILS_DIR1) install
 	rm -rf $(STAGING_DIR)/info $(STAGING_DIR)/man $(STAGING_DIR)/share/doc \
 		$(STAGING_DIR)/share/locale
+	mkdir -p $(STAGING_DIR)/usr/bin;
+	set -e; \
+	for app in addr2line ar as c++filt gprof ld nm objcopy \
+		    objdump ranlib readelf size strings strip ; \
+	do \
+		if [ -x $(STAGING_DIR)/bin/$(ARCH)-uclibc-$${app} ] ; then \
+		    (cd $(STAGING_DIR)/$(GNU_TARGET_NAME)/bin; \
+			ln -fs ../../bin/$(ARCH)-uclibc-$${app} $${app}; \
+		    ); \
+		    (cd $(STAGING_DIR)/usr/bin; \
+			ln -fs ../../bin/$(ARCH)-uclibc-$${app} $${app}; \
+		    ); \
+		fi; \
+	done;
 
 $(STAGING_DIR)/lib/libg.a:
 	$(STAGING_DIR)/$(GNU_TARGET_NAME)/bin/ar rv $(STAGING_DIR)/lib/libg.a;
@@ -174,12 +193,12 @@ binutils-dirclean:
 # Next build first pass gcc compiler
 #
 #############################################################
-GCC_BUILD_DIR1:=$(BUILD_DIR)/gcc-initial
+GCC_BUILD_DIR1:=$(TOOL_BUILD_DIR)/gcc-initial
 $(DL_DIR)/$(GCC_SOURCE):
 	$(WGET) -P $(DL_DIR) $(GCC_SITE)/$(GCC_SOURCE)
 
-$(GCC_DIR)/.unpacked: $(BUILD_DIR)/.setup $(DL_DIR)/$(GCC_SOURCE)
-	zcat $(DL_DIR)/$(GCC_SOURCE) | tar -C $(BUILD_DIR) -xvf -
+$(GCC_DIR)/.unpacked: $(TOOL_BUILD_DIR)/.setup $(DL_DIR)/$(GCC_SOURCE)
+	zcat $(DL_DIR)/$(GCC_SOURCE) | tar -C $(TOOL_BUILD_DIR) -xvf -
 	touch $(GCC_DIR)/.unpacked
 
 $(GCC_DIR)/.patched: $(GCC_DIR)/.unpacked
@@ -223,8 +242,9 @@ $(GCC_DIR)/.gcc_build_hacks: $(GCC_DIR)/.patched
 # # the step or libgcc will not build...
 $(GCC_BUILD_DIR1)/.configured: $(GCC_DIR)/.gcc_build_hacks
 	mkdir -p $(GCC_BUILD_DIR1)
-	(cd $(GCC_BUILD_DIR1); PATH=$(STAGING_DIR)/bin:$$PATH AR=$(ARCH)-uclibc-ar \
-		RANLIB=$(ARCH)-uclibc-ranlib CC=$(HOSTCC) $(GCC_DIR)/configure \
+	(cd $(GCC_BUILD_DIR1); AR=$(ARCH)-uclibc-ar \
+		RANLIB=$(ARCH)-uclibc-ranlib CC=$(HOSTCC) \
+		$(GCC_DIR)/configure \
 		--target=$(GNU_TARGET_NAME) \
 		--prefix=$(STAGING_DIR) \
 		--exec-prefix=$(STAGING_DIR) \
@@ -245,22 +265,21 @@ $(GCC_BUILD_DIR1)/.configured: $(GCC_DIR)/.gcc_build_hacks
 	touch $(GCC_BUILD_DIR1)/.configured
 
 $(GCC_BUILD_DIR1)/.compiled: $(GCC_BUILD_DIR1)/.configured
-	PATH=$(STAGING_DIR)/bin:$$PATH $(MAKE) -C $(GCC_BUILD_DIR1) \
+	$(MAKE) -C $(GCC_BUILD_DIR1) \
 	    AR_FOR_TARGET=$(STAGING_DIR)/bin/$(ARCH)-uclibc-ar \
 	    RANLIB_FOR_TARGET=$(STAGING_DIR)/bin/$(ARCH)-uclibc-ranlib
 	touch $(GCC_BUILD_DIR1)/.compiled
 
-$(GCC_BUILD_DIR1)/.installed: $(GCC_BUILD_DIR1)/.compiled
-	PATH=$(STAGING_DIR)/bin:$$PATH $(MAKE) -C $(GCC_BUILD_DIR1) install;
+$(STAGING_DIR)/bin/$(ARCH)-uclibc-gcc: $(GCC_BUILD_DIR1)/.compiled
+	$(MAKE) -C $(GCC_BUILD_DIR1) install;
 	#Cleanup then mess when --program-prefix mysteriously fails 
 	-mv $(STAGING_DIR)/bin/$(GNU_TARGET_NAME)-cpp $(STAGING_DIR)/bin/$(ARCH)-uclibc-cpp
 	-mv $(STAGING_DIR)/bin/$(GNU_TARGET_NAME)-gcc $(STAGING_DIR)/bin/$(ARCH)-uclibc-gcc
 	rm -f $(STAGING_DIR)/bin/gccbug $(STAGING_DIR)/bin/gcov
 	rm -rf $(STAGING_DIR)/info $(STAGING_DIR)/man $(STAGING_DIR)/share/doc \
 		$(STAGING_DIR)/share/locale
-	touch $(GCC_BUILD_DIR1)/.installed
 
-gcc_initial: binutils $(UCLIBC_DIR)/.configured $(GCC_BUILD_DIR1)/.installed
+gcc_initial: binutils $(UCLIBC_DIR)/.configured $(STAGING_DIR)/bin/$(ARCH)-uclibc-gcc
 
 gcc_initial-clean:
 	rm -rf $(GCC_BUILD_DIR1)
@@ -282,7 +301,7 @@ gcc_initial-dirclean:
 $(DL_DIR)/$(UCLIBC_SOURCE):
 	$(WGET) -P $(DL_DIR) $(UCLIBC_SITE)/$(UCLIBC_SOURCE)
 
-$(UCLIBC_DIR)/.unpacked: $(BUILD_DIR)/.setup $(DL_DIR)/$(UCLIBC_SOURCE)
+$(UCLIBC_DIR)/.unpacked: $(TOOL_BUILD_DIR)/.setup $(DL_DIR)/$(UCLIBC_SOURCE)
 	bzcat $(DL_DIR)/$(UCLIBC_SOURCE) | tar -C $(BUILD_DIR) -xvf -
 	touch $(UCLIBC_DIR)/.unpacked
 
@@ -324,11 +343,13 @@ $(TARGET_DIR)/lib/libc.so.0: $(STAGING_DIR)/lib/libc.a
 
 $(TARGET_DIR)/usr/bin/ldd: $(TARGET_DIR)/lib/libc.so.0
 	$(MAKE) -C $(UCLIBC_DIR) PREFIX=$(TARGET_DIR) install_target_utils
+	(cd $(TARGET_DIR)/sbin; ln -s /bin/true ldconfig) 
 
 UCLIBC_TARGETS=$(TARGET_DIR)/lib/libc.so.0 $(TARGET_DIR)/usr/bin/ldd
 endif
 
-uclibc: gcc_initial $(STAGING_DIR)/lib/libc.a $(UCLIBC_TARGETS)
+uclibc: $(STAGING_DIR)/bin/$(ARCH)-uclibc-gcc $(STAGING_DIR)/lib/libc.a \
+	$(UCLIBC_TARGETS)
 
 uclibc-clean:
 	-$(MAKE) -C $(UCLIBC_DIR) clean
@@ -347,7 +368,7 @@ uclibc-dirclean:
 # the newly built shared uClibc library.
 #
 #############################################################
-GCC_BUILD_DIR2:=$(BUILD_DIR)/gcc-final
+GCC_BUILD_DIR2:=$(TOOL_BUILD_DIR)/gcc-final
 $(GCC_DIR)/.g++_build_hacks: $(GCC_DIR)/.patched
 	#
 	# Hack up the soname for libstdc++
@@ -373,9 +394,10 @@ $(GCC_DIR)/.g++_build_hacks: $(GCC_DIR)/.patched
 
 $(GCC_BUILD_DIR2)/.configured: $(GCC_DIR)/.g++_build_hacks
 	mkdir -p $(GCC_BUILD_DIR2)
-	(cd $(GCC_BUILD_DIR2); PATH=$(STAGING_DIR)/bin:$$PATH AR=$(TARGET_CROSS)ar \
-		RANLIB=$(TARGET_CROSS)ranlib LD=$(TARGET_CROSS)ld NM=$(TARGET_CROSS)nm \
-		CC=$(HOSTCC) $(GCC_DIR)/configure \
+	(cd $(GCC_BUILD_DIR2); AR=$(TARGET_CROSS)ar \
+		RANLIB=$(TARGET_CROSS)ranlib LD=$(TARGET_CROSS)ld \
+		NM=$(TARGET_CROSS)nm CC=$(HOSTCC) \
+		$(GCC_DIR)/configure \
 		--target=$(GNU_TARGET_NAME) \
 		--prefix=$(STAGING_DIR) \
 		--exec-prefix=$(STAGING_DIR) \
@@ -401,21 +423,20 @@ $(GCC_BUILD_DIR2)/.configured: $(GCC_DIR)/.g++_build_hacks
 	touch $(GCC_BUILD_DIR2)/.configured
 
 $(GCC_BUILD_DIR2)/.compiled: $(GCC_BUILD_DIR2)/.configured
-	PATH=$(STAGING_DIR)/bin:$$PATH CC=$(HOSTCC) \
+	CC=$(HOSTCC) \
 	    AR_FOR_TARGET=$(TARGET_CROSS)ar RANLIB_FOR_TARGET=$(TARGET_CROSS)ranlib \
 	    LD_FOR_TARGET=$(TARGET_CROSS)ld NM_FOR_TARGET=$(TARGET_CROSS)nm \
 	    CC_FOR_TARGET=$(TARGET_CROSS)gcc $(MAKE) -C $(GCC_BUILD_DIR2)
 	touch $(GCC_BUILD_DIR2)/.compiled
 
 $(GCC_BUILD_DIR2)/.installed: $(GCC_BUILD_DIR2)/.compiled
-	PATH=$(STAGING_DIR)/bin:$$PATH $(MAKE) -C $(GCC_BUILD_DIR2) install;
 	touch $(GCC_BUILD_DIR2)/.installed
 
-#Cleanup then mess when --program-prefix mysteriously fails 
-$(GCC_BUILD_DIR2)/.fixedup: $(GCC_BUILD_DIR2)/.installed
-	-mv $(STAGING_DIR)/bin/gcc $(STAGING_DIR)/$(GNU_TARGET_NAME)/bin;
-	-mv $(STAGING_DIR)/bin/protoize $(STAGING_DIR)/$(GNU_TARGET_NAME)/bin;
-	-mv $(STAGING_DIR)/bin/unprotoize $(STAGING_DIR)/$(GNU_TARGET_NAME)/bin;
+$(STAGING_DIR)/bin/$(ARCH)-uclibc-g++: $(GCC_BUILD_DIR2)/.compiled
+	$(MAKE) -C $(GCC_BUILD_DIR2) install;
+	-mv $(STAGING_DIR)/bin/gcc $(STAGING_DIR)/usr/bin;
+	-mv $(STAGING_DIR)/bin/protoize $(STAGING_DIR)/usr/bin;
+	-mv $(STAGING_DIR)/bin/unprotoize $(STAGING_DIR)/usr/bin;
 	-mv $(STAGING_DIR)/bin/$(GNU_TARGET_NAME)-cpp $(STAGING_DIR)/bin/$(ARCH)-uclibc-cpp
 	-mv $(STAGING_DIR)/bin/$(GNU_TARGET_NAME)-gcc $(STAGING_DIR)/bin/$(ARCH)-uclibc-gcc
 	-mv $(STAGING_DIR)/bin/$(GNU_TARGET_NAME)-c++ $(STAGING_DIR)/bin/$(ARCH)-uclibc-c++
@@ -424,32 +445,20 @@ $(GCC_BUILD_DIR2)/.fixedup: $(GCC_BUILD_DIR2)/.installed
 	rm -f $(STAGING_DIR)/bin/cpp $(STAGING_DIR)/bin/gcov $(STAGING_DIR)/bin/*gccbug
 	rm -rf $(STAGING_DIR)/info $(STAGING_DIR)/man $(STAGING_DIR)/share/doc \
 		$(STAGING_DIR)/share/locale
-	touch $(GCC_BUILD_DIR2)/.fixedup
-
-$(BUILD_DIR)/.shuffled: $(GCC_BUILD_DIR2)/.fixedup
-	mkdir -p $(STAGING_DIR)/usr/bin;
-	(set -e; cd $(STAGING_DIR)/usr/bin; \
-		for i in $(STAGING_DIR)/bin/* ; do \
-		j=`basename $$i`; \
-		k=`basename $$i| sed -e "s,$(ARCH)-uclibc-,,g"`; \
-		ln -fs ../../bin/$$j $$k; \
-	done)
-	(set -e; cd $(STAGING_DIR)/$(GNU_TARGET_NAME)/bin; \
-		for i in $(STAGING_DIR)/bin/* ; do \
-		j=`basename $$i`; \
-		k=`basename $$i| sed -e "s,$(ARCH)-uclibc-,,g"`; \
-		ln -fs ../../bin/$$j $$k; \
-	done)
-	touch $(BUILD_DIR)/.shuffled
-
-$(BUILD_DIR)/.stripped: $(BUILD_DIR)/.shuffled
 	# Strip the host binaries
 	-strip --strip-all -R .note -R .comment $(STAGING_DIR)/bin/*
 	# Strip the target shared libs
 	-$(STRIP) --strip-unneeded -R .note -R .comment $(STAGING_DIR)/lib/*.so*;
-	touch $(BUILD_DIR)/.stripped
-
-gcc_final: uclibc $(BUILD_DIR)/.stripped
+	set -e; 
+	for app in cc gcc c89 cpp c++ g++ ; do \
+		if [ -x $(STAGING_DIR)/bin/$(ARCH)-uclibc-$${app} ] ; then \
+		    (cd $(STAGING_DIR)/usr/bin; \
+			ln -fs ../../bin/$(ARCH)-uclibc-$${app} $${app}; \
+		    ); \
+		fi; \
+	done;
+
+gcc_final: binutils gcc_initial uclibc $(STAGING_DIR)/bin/$(ARCH)-uclibc-g++
 
 gcc_final-clean:
 	rm -rf $(GCC_BUILD_DIR2)

make/uclibc_toolchain_2_95.mk

@@ -25,6 +25,9 @@ ifeq ($(GCC_2_95_TOOLCHAIN),true)
 # hacking on the toolchain...
 #
 #############################################################
+#Directory in which to build the toolchain
+TOOL_BUILD_DIR:=$(BASE_DIR)/toolchain_build
+
 TARGET_LANGUAGES:=c,c++
 
 # If you want multilib enabled, enable this...
@@ -40,35 +43,35 @@ MULTILIB:=--enable-multilib
 #############################################################
 BINUTILS_SITE:=ftp://ftp.gnu.org/gnu/binutils/
 BINUTILS_SOURCE:=binutils-2.13.2.1.tar.bz2
-BINUTILS_DIR:=$(BUILD_DIR)/binutils-2.13.2.1
+BINUTILS_DIR:=$(TOOL_BUILD_DIR)/binutils-2.13.2.1
 #
 # Perhaps you would perfer to use the older 2.12.1 version?
 #BINUTILS_SITE:=ftp://ftp.gnu.org/gnu/binutils/
 #BINUTILS_SOURCE:=binutils-2.12.1.tar.bz2
-#BINUTILS_DIR:=$(BUILD_DIR)/binutils-2.12.1
+#BINUTILS_DIR:=$(TOOL_BUILD_DIR)/binutils-2.12.1
 
 ifeq ($(USE_UCLIBC_SNAPSHOT),true)
 # Be aware that this changes daily....
-UCLIBC_DIR=$(BUILD_DIR)/uClibc
+UCLIBC_DIR=$(TOOL_BUILD_DIR)/uClibc
 UCLIBC_SOURCE=uClibc-snapshot.tar.bz2
 UCLIBC_SITE:=ftp://www.uclibc.org/uClibc
 else
-UCLIBC_DIR:=$(BUILD_DIR)/uClibc-0.9.17
+UCLIBC_DIR:=$(TOOL_BUILD_DIR)/uClibc-0.9.17
 UCLIBC_SOURCE:=uClibc-0.9.17.tar.bz2
 UCLIBC_SITE:=http://www.kernel.org/pub/linux/libs/uclibc
 endif
 
 GCC_SITE:=http://www.kernel.org/pub/linux/libs/uclibc/toolchain
 GCC_SOURCE:=gcc-20011006.tar.bz2
-GCC_DIR:=$(BUILD_DIR)/gcc-20011006
+GCC_DIR:=$(TOOL_BUILD_DIR)/gcc-20011006
 
 ELF2FLT_SITE:=http://www.kernel.org/pub/linux/libs/uclibc/toolchain
 ELF2FLT_SOURCE:=elf2flt-20020731.tar.bz2
-ELF2FLT_DIR:=$(BUILD_DIR)/elf2flt
+ELF2FLT_DIR:=$(TOOL_BUILD_DIR)/elf2flt
 
 STLPORT_SITE=http://www.stlport.org/archive
 STLPORT_SOURCE=STLport-4.5.3.tar.gz
-STLPORT_DIR=$(BUILD_DIR)/STLport-4.5.3
+STLPORT_DIR=$(TOOL_BUILD_DIR)/STLport-4.5.3
 
 
 
@@ -77,8 +80,8 @@ STLPORT_DIR=$(BUILD_DIR)/STLport-4.5.3
 # Setup some initial paths
 #
 #############################################################
-$(BUILD_DIR)/.setup:
-	mkdir -p $(BUILD_DIR)
+$(TOOL_BUILD_DIR)/.setup:
+	mkdir -p $(TOOL_BUILD_DIR)
 	mkdir -p $(DL_DIR)
 	mkdir -p $(STAGING_DIR)
 	mkdir -p $(STAGING_DIR)/include
@@ -89,7 +92,7 @@ $(BUILD_DIR)/.setup:
 	(cd $(STAGING_DIR)/$(GNU_TARGET_NAME); ln -fs ../include sys-include)
 	mkdir -p $(STAGING_DIR)/usr/lib
 	(cd $(STAGING_DIR)/usr/lib; ln -fs ../../lib/gcc-lib)
-	touch $(BUILD_DIR)/.setup
+	touch $(TOOL_BUILD_DIR)/.setup
 
 
 #############################################################
@@ -113,12 +116,12 @@ uclibc_toolchain-dirclean: gcc_final-dirclean uclibc-dirclean gcc_initial-dircle
 # build binutils
 #
 #############################################################
-BINUTILS_DIR1:=$(BUILD_DIR)/binutils-build
+BINUTILS_DIR1:=$(TOOL_BUILD_DIR)/binutils-build
 $(DL_DIR)/$(BINUTILS_SOURCE):
 	$(WGET) -P $(DL_DIR) $(BINUTILS_SITE)/$(BINUTILS_SOURCE)
 
-$(BINUTILS_DIR)/.unpacked: $(BUILD_DIR)/.setup $(DL_DIR)/$(BINUTILS_SOURCE)
-	bzcat $(DL_DIR)/$(BINUTILS_SOURCE) | tar -C $(BUILD_DIR) -xvf -
+$(BINUTILS_DIR)/.unpacked: $(TOOL_BUILD_DIR)/.setup $(DL_DIR)/$(BINUTILS_SOURCE)
+	bzcat $(DL_DIR)/$(BINUTILS_SOURCE) | tar -C $(TOOL_BUILD_DIR) -xvf -
 	touch $(BINUTILS_DIR)/.unpacked
 
 $(BINUTILS_DIR)/.patched: $(BINUTILS_DIR)/.unpacked
@@ -185,12 +188,12 @@ binutils-dirclean:
 # Next build first pass gcc compiler
 #
 #############################################################
-GCC_BUILD_DIR1:=$(BUILD_DIR)/gcc-initial
+GCC_BUILD_DIR1:=$(TOOL_BUILD_DIR)/gcc-initial
 $(DL_DIR)/$(GCC_SOURCE):
 	$(WGET) -P $(DL_DIR) $(GCC_SITE)/$(GCC_SOURCE)
 
-$(GCC_DIR)/.unpacked: $(BUILD_DIR)/.setup $(DL_DIR)/$(GCC_SOURCE)
-	bzcat $(DL_DIR)/$(GCC_SOURCE) | tar -C $(BUILD_DIR) -xvf -
+$(GCC_DIR)/.unpacked: $(TOOL_BUILD_DIR)/.setup $(DL_DIR)/$(GCC_SOURCE)
+	bzcat $(DL_DIR)/$(GCC_SOURCE) | tar -C $(TOOL_BUILD_DIR) -xvf -
 	touch $(GCC_DIR)/.unpacked
 
 $(GCC_DIR)/.patched: $(GCC_DIR)/.unpacked
@@ -245,7 +248,7 @@ $(GCC_DIR)/.gcc_build_hacks: $(GCC_DIR)/.patched
 # # the step or libgcc will not build...
 $(GCC_BUILD_DIR1)/.configured: $(GCC_DIR)/.gcc_build_hacks
 	mkdir -p $(GCC_BUILD_DIR1)
-	(cd $(GCC_BUILD_DIR1); PATH=$(STAGING_DIR)/bin:$$PATH AR=$(ARCH)-uclibc-ar \
+	(cd $(GCC_BUILD_DIR1); AR=$(ARCH)-uclibc-ar \
 		RANLIB=$(ARCH)-uclibc-ranlib CC=$(HOSTCC) $(GCC_DIR)/configure \
 		--target=$(GNU_TARGET_NAME) \
 		--prefix=$(STAGING_DIR) \
@@ -267,13 +270,13 @@ $(GCC_BUILD_DIR1)/.configured: $(GCC_DIR)/.gcc_build_hacks
 	touch $(GCC_BUILD_DIR1)/.configured
 
 $(GCC_BUILD_DIR1)/.compiled: $(GCC_BUILD_DIR1)/.configured
-	PATH=$(STAGING_DIR)/bin:$$PATH $(MAKE) -C $(GCC_BUILD_DIR1) \
+	$(MAKE) -C $(GCC_BUILD_DIR1) \
 	    AR_FOR_TARGET=$(STAGING_DIR)/bin/$(ARCH)-uclibc-ar \
 	    RANLIB_FOR_TARGET=$(STAGING_DIR)/bin/$(ARCH)-uclibc-ranlib
 	touch $(GCC_BUILD_DIR1)/.compiled
 
 $(GCC_BUILD_DIR1)/.installed: $(GCC_BUILD_DIR1)/.compiled
-	PATH=$(STAGING_DIR)/bin:$$PATH $(MAKE) -C $(GCC_BUILD_DIR1) install;
+	$(MAKE) -C $(GCC_BUILD_DIR1) install;
 	#Cleanup then mess when --program-prefix mysteriously fails 
 	-mv $(STAGING_DIR)/bin/$(GNU_TARGET_NAME)-cpp $(STAGING_DIR)/bin/$(ARCH)-uclibc-cpp
 	-mv $(STAGING_DIR)/bin/$(GNU_TARGET_NAME)-gcc $(STAGING_DIR)/bin/$(ARCH)-uclibc-gcc
@@ -304,11 +307,11 @@ gcc_initial-dirclean:
 $(DL_DIR)/$(UCLIBC_SOURCE):
 	$(WGET) -P $(DL_DIR) $(UCLIBC_SITE)/$(UCLIBC_SOURCE)
 
-$(UCLIBC_DIR)/.unpacked: $(BUILD_DIR)/.setup $(DL_DIR)/$(UCLIBC_SOURCE)
-	bzcat $(DL_DIR)/$(UCLIBC_SOURCE) | tar -C $(BUILD_DIR) -xvf -
+$(UCLIBC_DIR)/.unpacked: $(TOOL_BUILD_DIR)/.setup $(DL_DIR)/$(UCLIBC_SOURCE)
+	bzcat $(DL_DIR)/$(UCLIBC_SOURCE) | tar -C $(TOOL_BUILD_DIR) -xvf -
 	touch $(UCLIBC_DIR)/.unpacked
 
-$(UCLIBC_DIR)/.configured: $(UCLIBC_DIR)/.unpacked $(BUILD_DIR)/linux/.configured
+$(UCLIBC_DIR)/.configured: $(UCLIBC_DIR)/.unpacked $(TOOL_BUILD_DIR)/linux/.configured
 	perl -i -p -e 's,^CROSS=.*,TARGET_ARCH=$(ARCH)\nCROSS=$(TARGET_CROSS),g' \
 		$(UCLIBC_DIR)/Rules.mak
 	cp $(SOURCE_DIR)/uClibc.config $(UCLIBC_DIR)/.config
@@ -369,7 +372,7 @@ uclibc-dirclean:
 # the newly built shared uClibc library.
 #
 #############################################################
-GCC_BUILD_DIR2:=$(BUILD_DIR)/gcc-final
+GCC_BUILD_DIR2:=$(TOOL_BUILD_DIR)/gcc-final
 $(GCC_DIR)/.g++_build_hacks: $(GCC_DIR)/.patched
 	#
 	# Hack up the soname for libstdc++
@@ -395,7 +398,7 @@ $(GCC_DIR)/.g++_build_hacks: $(GCC_DIR)/.patched
 
 $(GCC_BUILD_DIR2)/.configured: $(GCC_DIR)/.g++_build_hacks
 	mkdir -p $(GCC_BUILD_DIR2)
-	(cd $(GCC_BUILD_DIR2); PATH=$(STAGING_DIR)/bin:$$PATH AR=$(TARGET_CROSS)ar \
+	(cd $(GCC_BUILD_DIR2); AR=$(TARGET_CROSS)ar \
 		RANLIB=$(TARGET_CROSS)ranlib LD=$(TARGET_CROSS)ld NM=$(TARGET_CROSS)nm \
 		CC=$(HOSTCC) $(GCC_DIR)/configure \
 		--target=$(GNU_TARGET_NAME) \
@@ -423,14 +426,14 @@ $(GCC_BUILD_DIR2)/.configured: $(GCC_DIR)/.g++_build_hacks
 	touch $(GCC_BUILD_DIR2)/.configured
 
 $(GCC_BUILD_DIR2)/.compiled: $(GCC_BUILD_DIR2)/.configured
-	PATH=$(STAGING_DIR)/bin:$$PATH CC=$(HOSTCC) \
+	CC=$(HOSTCC) \
 	    AR_FOR_TARGET=$(TARGET_CROSS)ar RANLIB_FOR_TARGET=$(TARGET_CROSS)ranlib \
 	    LD_FOR_TARGET=$(TARGET_CROSS)ld NM_FOR_TARGET=$(TARGET_CROSS)nm \
 	    CC_FOR_TARGET=$(TARGET_CROSS)gcc $(MAKE) -C $(GCC_BUILD_DIR2)
 	touch $(GCC_BUILD_DIR2)/.compiled
 
 $(GCC_BUILD_DIR2)/.installed: $(GCC_BUILD_DIR2)/.compiled
-	PATH=$(STAGING_DIR)/bin:$$PATH $(MAKE) -C $(GCC_BUILD_DIR2) install;
+	$(MAKE) -C $(GCC_BUILD_DIR2) install;
 	touch $(GCC_BUILD_DIR2)/.installed
 
 #Cleanup then mess when --program-prefix mysteriously fails 
@@ -459,7 +462,7 @@ $(DL_DIR)/$(STLPORT_SOURCE):
 	$(WGET) -P $(DL_DIR) $(STLPORT_SITE)/$(STLPORT_SOURCE)
 
 $(STLPORT_DIR)/Makefile: $(DL_DIR)/$(STLPORT_SOURCE) $(STLPORT_PATCH)
-	zcat $(DL_DIR)/$(STLPORT_SOURCE) | tar -C $(BUILD_DIR) -xvf - 
+	zcat $(DL_DIR)/$(STLPORT_SOURCE) | tar -C $(TOOL_BUILD_DIR) -xvf - 
 	cat $(STLPORT_PATCH) | patch -d $(STLPORT_DIR) -p1
 
 $(STLPORT_DIR)/lib/libstdc++.a: $(STLPORT_DIR)/Makefile
@@ -490,7 +493,7 @@ stlport-dirclean:
 # Final cleanups....
 #
 #############################################################
-$(BUILD_DIR)/.shuffled: $(GCC_BUILD_DIR2)/.fixedup
+$(TOOL_BUILD_DIR)/.shuffled: $(GCC_BUILD_DIR2)/.fixedup
 	mkdir -p $(STAGING_DIR)/usr/bin;
 	(set -e; cd $(STAGING_DIR)/usr/bin; \
 		for i in $(STAGING_DIR)/bin/* ; do \
@@ -504,16 +507,19 @@ $(BUILD_DIR)/.shuffled: $(GCC_BUILD_DIR2)/.fixedup
 		k=`basename $$i| sed -e "s,$(ARCH)-uclibc-,,g"`; \
 		ln -fs ../../bin/$$j $$k; \
 	done)
-	touch $(BUILD_DIR)/.shuffled
+	touch $(TOOL_BUILD_DIR)/.shuffled
 
-$(BUILD_DIR)/.stripped: $(BUILD_DIR)/.shuffled
+$(TOOL_BUILD_DIR)/.stripped: $(TOOL_BUILD_DIR)/.shuffled
 	# Strip the host binaries
 	-strip --strip-all -R .note -R .comment $(STAGING_DIR)/bin/*
 	# Strip the target shared libs
 	-$(STRIP) --strip-unneeded -R .note -R .comment $(STAGING_DIR)/lib/*.so*;
-	touch $(BUILD_DIR)/.stripped
+	touch $(TOOL_BUILD_DIR)/.stripped
+
+$(STAGING_DIR)/bin/$(TARGET_CC): $(GCC_BUILD_DIR2)/.fixedup $(TOOL_BUILD_DIR)/.stripped $(STLPORT_TARGET)
+	cp --remove-destination -a $(STAGING_DIR) $(STAGING_DIR)
 
-gcc_final: uclibc $(GCC_BUILD_DIR2)/.fixedup $(BUILD_DIR)/.stripped $(STLPORT_TARGET)
+gcc_final: uclibc $(STAGING_DIR)/bin/$(TARGET_CC)
 
 gcc_final-clean:
 	rm -rf $(GCC_BUILD_DIR2)

make/udhcp.mk

@@ -48,6 +48,7 @@ $(TARGET_DIR)/sbin/udhcpc: $(UDHCP_DIR)/udhcpc
 	perl -i -p -e 's/PUMP/UDHCPC/' $(TARGET_DIR)/etc/pcmcia/network*
 	perl -i -p -e 's/DHCP="n"/DHCP="y"/' $(TARGET_DIR)/etc/pcmcia/network*
 	mkdir -p $(TARGET_DIR)/sbin
+	rm -f $(TARGET_DIR)/sbin/udhcpc
 	cp $(UDHCP_DIR)/udhcpc $(TARGET_DIR)/sbin/
 	mkdir -p $(TARGET_DIR)/usr/share/udhcpc
 	cp $(UDHCP_DIR)/samples/simple.script $(TARGET_DIR)/usr/share/udhcpc/default.script

make/valgrind.mk

@@ -22,7 +22,7 @@ $(VALGRIND_DIR)/.patched: $(VALGRIND_DIR)/.unpacked
 
 $(VALGRIND_DIR)/.configured: $(VALGRIND_DIR)/.patched
 	(cd $(VALGRIND_DIR); rm -rf config.cache; \
-		PATH=$(STAGING_DIR)/bin:$$PATH CC=$(TARGET_CC) \
+		PATH=$(TARGET_PATH) CC=$(TARGET_CC) \
 		./configure \
 		--target=$(GNU_TARGET_NAME) \
 		--prefix=/usr \
@@ -43,12 +43,11 @@ $(VALGRIND_DIR)/.configured: $(VALGRIND_DIR)/.patched
 	touch  $(VALGRIND_DIR)/.configured
 
 $(VALGRIND_DIR)/valgrind.so: $(VALGRIND_DIR)/.configured
-	$(MAKE) CC=$(TARGET_CC) -C $(VALGRIND_DIR)
+	$(MAKE) -C $(VALGRIND_DIR)
 	-$(STRIP) --strip-unneeded $(VALGRIND_DIR)/*.so*
 	touch -c $(VALGRIND_DIR)/valgrind.so
 
 $(TARGET_DIR)/usr/bin/valgrind: $(VALGRIND_DIR)/valgrind.so
-	PATH=$(STAGING_DIR)/bin:$$PATH CC=$(TARGET_CC) \
 	$(MAKE) \
 	    prefix=$(TARGET_DIR)/usr \
 	    exec_prefix=$(TARGET_DIR)/usr \

make/zlib.mk

@@ -42,6 +42,7 @@ $(STAGING_DIR)/lib/libz.so.1.1.4: $(ZLIB_DIR)/libz.so.1.1.4
 	cp -dpf $(ZLIB_DIR)/zconf.h $(STAGING_DIR)/include;
 	cp -dpf $(ZLIB_DIR)/libz.so* $(STAGING_DIR)/lib;
 	(cd $(STAGING_DIR)/lib; ln -fs libz.so.1.1.4 libz.so.1);
+	chmod a-x $(STAGING_DIR)/lib/libz.so.1.1.4
 	touch -c $(STAGING_DIR)/lib/libz.so.1.1.4
 
 $(TARGET_DIR)/lib/libz.so.1.1.4: $(STAGING_DIR)/lib/libz.so.1.1.4
@@ -54,6 +55,8 @@ $(TARGET_DIR)/usr/lib/libz.a: $(TARGET_DIR)/lib/libz.so.1.1.4
 	cp -dpf $(STAGING_DIR)/include/zlib.h $(TARGET_DIR)/usr/include/
 	cp -dpf $(STAGING_DIR)/include/zconf.h $(TARGET_DIR)/usr/include/
 	cp -dpf $(STAGING_DIR)/lib/libz.a $(TARGET_DIR)/usr/lib/
+	rm -f $(TARGET_DIR)/lib/libz.so
+	(cd $(TARGET_DIR)/usr/lib; ln -fs /lib/libz.so.1.1.4 libz.so)
 	touch -c $(TARGET_DIR)/usr/lib/libz.a
 
 zlib-headers: $(TARGET_DIR)/usr/lib/libz.a

sources/busybox.config

@@ -29,6 +29,7 @@ EXTRA_CFLAGS_OPTIONS=""
 # Installation Options
 #
 # CONFIG_INSTALL_NO_USR is not set
+PREFIX="./_install"
 
 #
 # Archival Utilities
@@ -52,8 +53,8 @@ CONFIG_FEATURE_TAR_CREATE=y
 CONFIG_FEATURE_TAR_BZIP2=y
 CONFIG_FEATURE_TAR_EXCLUDE=y
 CONFIG_FEATURE_TAR_GZIP=y
-# CONFIG_FEATURE_TAR_OLD_FORMAT is not set
-CONFIG_FEATURE_GNUTAR_LONG_FILENAME=y
+# CONFIG_FEATURE_TAR_OLDGNU_COMPATABILITY is not set
+CONFIG_FEATURE_TAR_GNU_EXTENSIONS=y
 CONFIG_FEATURE_UNARCHIVE_TAPE=y
 CONFIG_UNCOMPRESS=y
 CONFIG_UNZIP=y
@@ -241,6 +242,12 @@ CONFIG_FEATURE_IFUPDOWN_IPV4=y
 CONFIG_FEATURE_IFUPDOWN_IPV6=y
 CONFIG_FEATURE_IFUPDOWN_IPX=y
 CONFIG_FEATURE_IFUPDOWN_MAPPING=y
+CONFIG_INETD=y
+# CONFIG_FEATURE_INETD_SUPPORT_BILTIN_ECHO is not set
+# CONFIG_FEATURE_INETD_SUPPORT_BILTIN_DISCARD is not set
+# CONFIG_FEATURE_INETD_SUPPORT_BILTIN_TIME is not set
+# CONFIG_FEATURE_INETD_SUPPORT_BILTIN_DAYTIME is not set
+# CONFIG_FEATURE_INETD_SUPPORT_BILTIN_CHARGEN is not set
 CONFIG_IP=y
 CONFIG_FEATURE_IP_ADDRESS=y
 

sources/gcc-002-mips-swfp.patch

@@ -1,52 +0,0 @@
-diff -urN gcc-3.2/gcc/config/mips/t-linux gcc-3.2-patched/gcc/config/mips/t-linux
---- gcc-3.2.orig/gcc/config/mips/t-linux	Wed Jan 16 17:22:02 2002
-+++ gcc-3.2/gcc/config/mips/t-linux	Mon Nov 11 15:23:33 2002
-@@ -1,3 +1,48 @@
-+# Don't run fixproto
-+STMP_FIXPROTO =
-+
-+# Don't install "assert.h" in gcc. We use the one in glibc.
-+INSTALL_ASSERT_H =
-+
-+# nop@nop.com: -fdata-sections messes with crtstuff.c's strategy to get
-+# ctors/dtors/eh in special sections.
-+CRTSTUFF_T_CFLAGS = -fno-data-sections
-+CRTSTUFF_T_CFLAGS_S = -fno-data-sections
-+# Hopefully that's enough.
-+
-+# Do not build libgcc1. Let gcc generate those functions. The GNU/Linux
-+# C library can handle them.
-+LIBGCC1 = 
-+CROSS_LIBGCC1 =
-+LIBGCC1_TEST =
-+
-+# Standard softfloat incantation:
-+
-+LIB2FUNCS_EXTRA = fp-bit.c dp-bit.c
-+
-+dp-bit.c: $(srcdir)/config/fp-bit.c
-+	echo '#ifdef __MIPSEL__' > dp-bit.c
-+	echo '#define FLOAT_BIT_ORDER_MISMATCH' >> dp-bit.c
-+	echo '#endif' >> dp-bit.c
-+	echo '#undef US_SOFTWARE_GOFAST' >> dp-bit.c
-+	echo '#undef FLOAT' >> dp-bit.c
-+	cat $(srcdir)/config/fp-bit.c >> dp-bit.c
-+
-+fp-bit.c: $(srcdir)/config/fp-bit.c
-+	echo '#ifdef __MIPSEL__' > fp-bit.c
-+	echo '#define FLOAT_BIT_ORDER_MISMATCH' >> fp-bit.c
-+	echo '#endif' >> fp-bit.c
-+	echo '#undef US_SOFTWARE_GOFAST' >> fp-bit.c
-+	echo '#define FLOAT' >> fp-bit.c
-+	cat $(srcdir)/config/fp-bit.c >> fp-bit.c
-+
-+MULTILIB_OPTIONS = msoft-float
-+MULTILIB_DIRNAMES = soft-float
-+MULTILIB_MATCHES =
-+MULTILIB_EXTRA_OPTS =
-+
-+LIBGCC = stmp-multilib
-+INSTALL_LIBGCC = install-multilib
- # We want fine grained libraries, so use the new code to build the
- # floating point emulation libraries.
- FPBIT = fp-bit.c